Note:
You must use a non-slip/non-creep pad with your RugBuddy. This can be found at your local hardware or flooring store or ordered through Speedheat.RugBuddy™

RugBuddy 165
3' x 5'
Price: $199.00
3' x 5'
Price: $199.00
- Tape down corners and sides of each panel
- Connect carpet panel(s) to IntuiStat™
- Install carpeting
- Program thermostat
- Smart thermostat recognizes the time it takes to reach desired temperature, so it takes out the guesswork for you!
- (i.e. If you want your room to be 68° when you arrive home at 6:00 p.m., just program the IntuiStat™ for 68° at 6:00 p.m. for the days you work, and it will be nice and comfy for you when you get home!)
Operation and Control Options
- Hard-wired with digital, programmable IntuiStat™ thermostat.
- 4 settings per day, 7 days a week!
- Use a timer to control on/off times automatically
- Use our PlugBuddy™ Smart Digital, Programmable, Plug-in Thermostat!
- Control with a hard-wired IntuiStat™ thermostat.
- Leave on as long as you like!
Free UPS Ground Shipping!
Order TileWarm DIY Systems Online Here!
Free Quotations Available for all Heating Systems!
For TileWarm™, WoodBeWarmer™, LamiMate™, VinylPal™, ShowerWarm™, and other hard surface heating strips, please send us your floorplan!
If
you prefer to order
your TileWarm DIY system online based on the square
footage of your floor area, click
here!
-
New or Replacement Flooring Installation
Hardwired with Programmable Thermostat
- Simply Fax or Email a Drawing of your Floorplan (just a
rough sketch with exact dimensions of all areas and thermostat
placement preference).
- Fax: 1-888-927-6357 or 678-391-3248
- Email: i...[at]
speedheat [dot] us
(click here to reveal email address)
- Just make sure to include:
- Drawing with size (dimensions) and placement of any large furniture, cabinets, doorways, etc.
- Floorcovering you plan to use - our systems can go under virtually any flooring!
- Subfloor
- Installation (i.e. glued, floating, nailed, and anything out of the ordinary for tile, carpet, etc.)
- Hard-wired with thermostat or plug in (for hard-wired, indicate thermostat placement preference).
- 120V or 240V system preference.
- Time frame for the job.
- Contact information, such as name, company, address, email, phone, fax, etc.
- If you have used our systems or similar systems in the past.
- Referred by: Not required, of course, but we always like to know how you found us... especially if it was a referral from someone you know. We like to thank our fans, personally!
- ... and any other information you think is important.
- Just make sure to include:
- Simply Fax or Email a Drawing of your Floorplan (just a
rough sketch with exact dimensions of all areas and thermostat
placement preference).



Speedheat Floor Heating is UpFront