Speedheat^® Floor Heating

Energy Efficient Electric Radiant Floor Heating

PlugBuddy SmartStat Troubleshooting

Indicates incorrect room temperature

1. Refer to thermostat manual to verify that your set temperature is what you expect it to be.
2. Refer to your thermostats manual for calibration. Use this feature to adjust the displayed temperature up to +5F (3C) or -5F (3C) degrees.

Heats or cools more than 5 degrees past its displayed set temperature

1. Verify that the ON/OFF switch on the side of the unit is set to ON.
2. Refer to thermostat manual to verify that your set temperature is what you expect it to be.
3. Refer to your unit's manual to decrease the units swing value to a narrower setting.
4. Verify that your unit's placement and mounting are reasonable per the installation section of its manual.

No heat or cooling when expected.

1. Verify that the ON/OFF switch on the side of the unit is set to ON.
2. Refer to thermostat manual to verify that your set temperature is what you expect it to be.

    Operational Test

1. Set unit to heat mode. Adjust set temperature to at least 5 degrees below room temperature. Then adjust set temperature upward one degree at a time. Listen carefully for a soft click from the thermostat. This click should be heard near room temperature. Heat should operate immediately.
2. Adjust set temperature down one degree at a time. Again, listen carefully for a soft click from the thermostat near room temperature. Heat should switch off immediately.

    Advanced Trouble Shooting

1. This thermostat is designed to switch hazardous voltage. Qualified service personnel may use the following information to trouble shoot the system.
2. The WIN100 uses a normally open single pole relay to control a heating or cooling system.
3. In heat mode, it should open when hotter than its set temperature and close when cooler than its set temperature.
4. In cool mode, it should close when hotter than its set temperature and open when cooler than its set temperature.

 

Speedheat is the world leader in safe, energy efficient, durable, electric radiant floor heating for under all flooring types.

As the inventors of electric radiant floor surface heating electric radiant floor heating in 1985, you can rest assured that you are dealing with professionals who know what we're doing. The super thin, patented element is less than 1/16 of an inch, so you know that build up isn't a problem.

Choose whatever flooring you like, and we have an energy efficient solution for you in whatever room you like!

Our UL-compliant heating systems can be used as primary heating, supplementary, or floor warming.

Get a Quote or Place an Order…